البدائل المكافئة
أقرب البدائل المكافئة من علامات تجارية أخرى، مع بيان الفروق لتتحقق منها قبل الطلب.
Parker P2LBX512ESNXB549
Parker Viking Xtreme — P2LBX (G1/4)
Parker P2LBX512ESNXB549 — Viking Xtreme 5/2-way directional control valve: G1/4 ports, single solenoid with spring return, 24 V DC, 15 mm solenoid, internal pilot supply, 10 bar maximum. The Janatics DS255SR61-WT0R0 shown here matches it on valve function, port size, coil voltage and maximum working pressure, and it shifts from 2 bar where the Parker needs 3.5 bar. Three points to check before you order. Port threads: the inlet and both outlet ports are G1/4 on either valve, but on this valve the two exhaust ports are G1/8, where the Parker part is G1/4 on all five body ports. Silencers, exhaust restrictors or exhaust piping sized for the Parker will need G1/8 fittings here. Temperature: this valve is rated +5 °C to +60 °C, where the Parker part is rated -10 °C to +50 °C, so it is not a like-for-like choice below +5 °C. Supply: the Parker part number covers the valve and solenoid only, with the plug ordered separately and built to the 15 mm Form C / ISO 15217 pattern, whereas this valve is supplied complete with a 22 mm coil and a PG9 connector carrying a red LED indicator. If you are reusing an existing wired plug, check the connector form before ordering. On flow the two are close: 1200 l/min here against 1290 l/min for the Parker, both measured at 6 bar inlet with a 1 bar pressure drop.
Festo CPE18-M1H-5L-1/4 (Festo 163142) - unchanged, confirmed twice
Festo CPE Compact Performance — CPE18 (G1/4)
Festo CPE18-M1H-5L-1/4 (Festo part no. 163142) - the 5/2-way single-solenoid, G1/4, 24 V DC Compact Performance valve this Janatics DS255SR61-WT0R0 stands in for. Both are internally piloted spool valves that reset on a pneumatic spring, and both are IP65 with the connector fitted. Ports 1, 2 and 4 are G1/4 as on the Festo valve, but exhaust ports 3 and 5 are G1/8 where Festo uses G1/4, so exhaust fittings and silencers will not carry over. Working pressure is 2 to 10 bar, against 2.5 to 10 bar for the Festo valve. Rated flow is 1200 l/min inlet to outlet and 700 l/min outlet to exhaust, measured at 6 bar inlet with a 1 bar pressure drop; Festo publishes 1500 l/min for its valve as a standard nominal flow rate referred to DIN 1343 standard conditions and does not state the test pressures behind that figure, so read the two as indicative rather than measured alike. Rated -10 to +60 degC ambient against -5 to +50 degC for the Festo valve, on compressed air from +5 to +50 degC against Festo's -5 to +50 degC. The manual override is push-and-turn locking as standard, where the Festo valve's is non-detenting unless its locking accessory is fitted. The red LED in this valve's connector has no counterpart in the Festo part number, because Festo puts the indicator in a separately ordered plug socket; the coil here is supplied with its own PG9 connector on a 22 mm coil, where the Festo valve takes a DIN EN 175301-803 form C plug socket, so a Festo socket or cable will not transfer.
Airtac 4V210-08BG
Airtac 4V200 Series (5/2-way)
Airtac 4V210-08BG — the 5/2-way, 1/4" G-thread, 24 V DC single-solenoid valve equivalent to this Janatics DS255SR61-WT0R0.
نوفّر DS255SR61-WT0R0 كبديل مكافئ من مخزون indSpare. تبحث عن علامة تجارية أخرى؟ اطلب عرض سعر ←
تصفّح جميع البدائل المنشورة
