البدائل المكافئة
أقرب البدائل المكافئة من علامات تجارية أخرى، مع بيان الفروق لتتحقق منها قبل الطلب.
Reotemp YY0401C59
Reotemp PT Series Bimetal Thermometer, 0–150°C, 4" dial, 1/2" NPT bottom, 4" stem, SS
Reotemp process grade bottom-connect bimetal thermometer with a 4 inch dial and external reset, 4 inch stem, 1/2 inch NPT lower connection and a 0 to 150 degrees C range. Built with 300 series stainless steel head, bezel, mounting bushing and stem, hermetically sealed to ASME B40.3 with IP67 and NEMA 6 protection, glass lens, and accuracy of plus or minus 1 percent of full scale. Suited to local temperature indication on tanks and pipework in chemical, oil and gas and water treatment service. Differences to note before you order: the Reotemp 0 to 150 degrees C dial is single scale in Celsius, while the instrument shown on this page carries a Fahrenheit secondary scale, and Reotemp's dual-scale range list contains no 0 to 150 degrees C pairing. The Reotemp stem is 4 inch (101.6 mm) long against 100 mm here, and 1/4 inch (6.35 mm) in diameter against 6 mm here. Dial size, range, connection, sealing class and accuracy grade are the same on both.
مواصفات قطعة Reotemp
- مقاس القرص المدرج
- 4 inch
- النطاق
- 0–150°C
- الوصلة
- 1/2" NPT bottom
- طول الساق
- 4 inch (~100 mm)
- مادة العلبة
- 304 SS
- مادة الساق
- 304 SS
Ashcroft 100AM=060L1000/150°C
Ashcroft Type 50EI60 Bimetal Thermometer, 0–150°C, 4" dial, 1/2" NPT bottom, 4" stem
Ashcroft Series Ax all stainless steel bimetal thermometer built to EN 13190, with a 100 mm dial, a 6 mm diameter stem 100 mm long, a fixed 1/2 inch male NPT lower connection and a 0 to 150 degrees C range. Construction is a 304 stainless steel case with bayonet ring, a 316L stainless steel stem and process connection, an instrument glass window and a silicone damped coil, rated IP66 and accurate to Class 1 of EN 13190. Supplied dry rather than liquid filled. Suited to local temperature indication on tanks, pipework and equipment skids in chemical, oil and gas and water treatment service. One difference to note before you order: the catalogued 0 to 150 degrees C Ashcroft dial is a single Celsius scale, while the instrument shown on this page carries a Fahrenheit secondary scale, and Ashcroft lists dual scales as a special order rather than as a catalogue option. Dial size, range, stem length and diameter, connection size, type and location, all stainless construction, window and accuracy class are the same on both.
مواصفات قطعة Ashcroft
- مقاس القرص المدرج
- 4 inch
- النطاق
- 0–150°C
- الوصلة
- 1/2" NPT bottom
- طول الساق
- 100 mm (4 inch)
- مادة العلبة
- 304 SS
- مادة الساق
- 304 SS
- المعيار
- ASME B40.200
نوفّر 84095918 كبديل مكافئ من مخزون indSpare. تبحث عن علامة تجارية أخرى؟ اطلب عرض سعر ←
تصفّح جميع البدائل المنشورة
