البدائل المكافئة
أقرب البدائل المكافئة من علامات تجارية أخرى، مع بيان الفروق لتتحقق منها قبل الطلب.
Insize 3203-75A
Insize Series 3203 Outside Micrometer, 50–75 mm, 0.01 mm graduation
The Insize 3203-75A is an analogue outside micrometer for the 50–75 mm range with 0.01 mm graduation, featuring carbide-tipped measuring faces, a spindle lock, and a ratchet thimble for consistent measuring force. It has a satin chrome finish and is supplied with a setting standard and storage case. Widely distributed in the GCC and accepted in maintenance and workshop inspection roles.
مواصفات قطعة Insize
- نطاق القياس
- 50–75 mm
- التدريج
- 0.01 mm
- أسطح القياس
- Carbide-tipped
- التحكم في القوة
- Ratchet thimble
- قفل المغزل
- Yes
- التشطيب
- Satin chrome
- يشمل
- Setting standard, case
Starrett 436.1MXRL-75
Starrett 436 Series Outside Micrometer, 50–75 mm, 0.01 mm graduation
The Starrett 436 series is a precision analogue outside micrometer covering the 50–75 mm range with 0.01 mm graduation. It features hardened and ground carbide-tipped measuring faces, a satin chrome finish sleeve and thimble, and a ratchet thimble for consistent measuring force. Supplied with a setting standard and storage case, it is a direct workshop-grade substitute for the Mitutoyo 103-139-10.
مواصفات قطعة Starrett
- نطاق القياس
- 50–75 mm
- التدريج
- 0.01 mm
- أسطح القياس
- Carbide-tipped
- تشطيب الجلبة
- Satin chrome
- التحكم في القوة
- Ratchet stop
- يشمل
- Setting standard, case
Tesa 00110103
Tesa Micromaster Outside Micrometer, 50–75 mm, 0.01 mm graduation
TESA 00110103 is an ISOMASTER analogue external micrometer, vernier model, 50–75 mm, reading to 0.01 mm. It is built to DIN 863 T1 / NF E 11-095 with tungsten carbide measuring inserts, a friction ratchet for repeatable measuring force, a locking screw on the spindle and a measuring force of up to 10 N. TESA publishes a maximum permissible error of 5 µm and a maximum permissible parallelism error of 3 µm at this size. ISOMASTER is TESA's analogue line; MICROMASTER is the separate digital line reading to 0.001 mm, and 00110103 does not belong to it. Two differences a buyer should note against the Mitutoyo 103-139-10 supplied here. First, the Mitutoyo is rated at ±2 µm maximum permissible error to EN ISO 3611 Class 1, a tighter figure than the 5 µm TESA publishes. Second, the Mitutoyo is supplied with box, spanner and a 50 mm setting standard, where TESA lists this micrometer with a measurement report and declaration of conformity.
مواصفات قطعة Tesa
- نطاق القياس
- 50–75 mm
- التدريج
- 0.01 mm
- أسطح القياس
- Carbide-tipped
- التحكم في القوة
- Ratchet thimble
- المغزل
- Hardened, ground and lapped
- المعيار
- ISO 3611
Mahr 4134002
Mahr Micromar 40 A Outside Micrometer, 50–75 mm, 0.01 mm graduation
The Mahr Micromar 40 A is a German-made analogue outside micrometer for the 50–75 mm range with 0.01 mm graduation. It features hardened carbide measuring faces, a friction thimble/ratchet for repeatable force, and a satin-finished sleeve and thimble. Widely accepted in metrology-grade workshop and QC environments as a like-for-like replacement for Mitutoyo Series 103 instruments.
مواصفات قطعة Mahr
- نطاق القياس
- 50–75 mm
- التدريج
- 0.01 mm
- أسطح القياس
- Carbide-tipped
- التحكم في القوة
- Ratchet/friction thimble
- التشطيب
- Satin chrome
- المعيار
- DIN 863
نوفّر 103-139-10 كبديل مكافئ من مخزون indSpare. تبحث عن علامة تجارية أخرى؟ اطلب عرض سعر ←
تصفّح جميع البدائل المنشورة
